Dansk
Svenska
Nederlands
Deutsch
English
PE-HD (PE80), thickness 3,00 mm, sheet dimensions 2000 x 1000 mm
Pris og tilgængelighed
SKU: 94050169Tilgængelighed: Udsolgt / ukendt leveringstid
Vi har i øjeblikket ikke denne vare på lager. Desværre kan vi ikke angive, om og hvornår denne artikel er tilgængelig.Når du forlader din e-mail-adresse, meddeler vi dig via mail, når dette produkt er tilbage på lager. Vi bruger naturligvis ikke dine data til andet end det.
Beskrivelse
PE-HD is a highly used thermoplastic material in industry. Formerly the types of polyethylene were divided according to its density (PE-LD, PE-MD, PE-HD). Currently the resistance classification according to ISO 9080 (PE63, PE80,
PE100) Compared to other thermoplastics, PE-HD has a excellent diffusion resistance, which is why it has been used for many years in the construction of pipelines for safe transport of gases.
Another essential advantage of this material is its stability against lightning.
UV for outdoor use, and the flexibility and ductility for the
hot molded.
It has good thermal stability up to + 80ºC, a lower limit than
of PP (Polypropylene), but unlike the latter, PE-HD has
good resistance to freezing (down to –50ºC).
PP margin:
0ºC / + 100ºC (with peaks of + 120ºC).
Advantage:
- Low specific gravity of 0.95 g / cm3 (compared to 1.40 g./cm3 of PVC)
- Excellent chemical resistance (high resistance to acids, alkalis and solvents)
- Very good resistance to abrasion.
- Good resistance to impact.
- Resistance to atmospheric agents. Stable against UV rays.
- Resistant against all types of microbiotic corrosion.
- There is no possibility of overgrowth or deposit.
- It does not have any water absorption.
- Good weldability. Accepts hot processing / molding well.
Application:
PHYSIOLOGICALLY NON-TOXIC: Due to its composition free of special additives, PE-HD complies with the usual food regulations (ÖNORMB 5014 Part 1, FDA, BGA, KTW ...), making it physiologically acceptable. It can be used in drinking water pipes, although for hot sanitary water PP is recommended, due to its greater thermal resistance.
PE100) Compared to other thermoplastics, PE-HD has a excellent diffusion resistance, which is why it has been used for many years in the construction of pipelines for safe transport of gases.
Another essential advantage of this material is its stability against lightning.
UV for outdoor use, and the flexibility and ductility for the
hot molded.
It has good thermal stability up to + 80ºC, a lower limit than
of PP (Polypropylene), but unlike the latter, PE-HD has
good resistance to freezing (down to –50ºC).
PP margin:
0ºC / + 100ºC (with peaks of + 120ºC).
Advantage:
- Low specific gravity of 0.95 g / cm3 (compared to 1.40 g./cm3 of PVC)
- Excellent chemical resistance (high resistance to acids, alkalis and solvents)
- Very good resistance to abrasion.
- Good resistance to impact.
- Resistance to atmospheric agents. Stable against UV rays.
- Resistant against all types of microbiotic corrosion.
- There is no possibility of overgrowth or deposit.
- It does not have any water absorption.
- Good weldability. Accepts hot processing / molding well.
Application:
PHYSIOLOGICALLY NON-TOXIC: Due to its composition free of special additives, PE-HD complies with the usual food regulations (ÖNORMB 5014 Part 1, FDA, BGA, KTW ...), making it physiologically acceptable. It can be used in drinking water pipes, although for hot sanitary water PP is recommended, due to its greater thermal resistance.
Specifikationer
| Height (mm) | 200 |
| Width (mm) | 1000 |
| Thickness (mm) | 3,00 |
| Colour | Black |
| Material | PE-HD |
| Max continuous temp (°C) | - 50 / + 80 |
| Hardness | 63 Shore D |
| Density (g/cm³) | 0,95 |
| Fire rating | Normal Inflamable B2 |
| Tensile strength | 22 N/mm2 |
| Elongation at break | 300 \% |
