Elring DIRKO HT. oxim (315 C) liquid gasket kit, Black, silicone compound, tube 70 ml
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 70ml tube incl. Accessories.
Visa produkt
Beskrivning
ELRING Dirko™ HT oxime (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 70ml tube incl. Accessories.
Specifikationer
| Max temp (°C) | +315 °C (24h) |
| Oil resistant | Yes |
| Max temp (°C) cont. | -60 tot +285 |
| Chemical basis | Oxime silicone |
| Curing | Room temperature vulcanised (RTV) |
| Components | Single component |
| Colour | Black |
| Consistency | Pasty, stable, permanently resilient when cured |
| Max sealing gap | 2,0 mm |
| pH value | Neutral |
| Electrical conductivity | Insulating |
| Hardness | 40 ± 5 |
| Density (g/ml) | 1,18 ± 0,2 |
| Elastic modulus 100\% | 1.0 ± 0.2 N/mm2 |
| Elongation at break | 400 ± 100 \% |
| Tensile strength | 3,3 ± 0,2 N / mm² |
| volume | 70 ml |
Bruksanvisningar
- Tech-Sheet-006-553.pdf Visa bruksanvisning
Omdoemen
Det finns inga recensioner foer denna produkt.
Fragor och svar
Inga fragor har staellts om denna produkt aennu.
Vi skickar din bestaellning med PostNL. Bestaellningar lagda mandag till fredag foere kl. 17:00 skickas samma dag. Vi erbjuder olika fraktalternativ. Du kan vaelja ett av alternativen vid kassan.
Leverans till EU/Vaerlden (DK)
| Leveranssaett | Orderbelopp under €103,49 | Orderbelopp oever €103,49 |
|---|---|---|
| Brevladepaket | €6,19 | Inga fraktkostnader! |
| Paket med sparning, Economy, upp till 2 kg | €10,29 | €4,19 |
| Paket med sparning (Track & Trace) | €15,39 | €9,29 |
Visa produkt
Beskrivning
ELRING Dirko™ HT oxime (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 70ml tube incl. Accessories.
Specifikationer
| Max temp (°C) | +315 °C (24h) |
| Oil resistant | Yes |
| Max temp (°C) cont. | -60 tot +285 |
| Chemical basis | Oxime silicone |
| Curing | Room temperature vulcanised (RTV) |
| Components | Single component |
| Colour | Black |
| Consistency | Pasty, stable, permanently resilient when cured |
| Max sealing gap | 2,0 mm |
| pH value | Neutral |
| Electrical conductivity | Insulating |
| Hardness | 40 ± 5 |
| Density (g/ml) | 1,18 ± 0,2 |
| Elastic modulus 100\% | 1.0 ± 0.2 N/mm2 |
| Elongation at break | 400 ± 100 \% |
| Tensile strength | 3,3 ± 0,2 N / mm² |
| volume | 70 ml |
Bruksanvisningar
- Tech-Sheet-006-553.pdf Visa bruksanvisning
Omdoemen
Det finns inga recensioner foer denna produkt.
Fragor och svar
Inga fragor har staellts om denna produkt aennu.
Vi skickar din bestaellning med PostNL. Bestaellningar lagda mandag till fredag foere kl. 17:00 skickas samma dag. Vi erbjuder olika fraktalternativ. Du kan vaelja ett av alternativen vid kassan.
Leverans till EU/Vaerlden (DK)
| Leveranssaett | Orderbelopp under €103,49 | Orderbelopp oever €103,49 |
|---|---|---|
| Brevladepaket | €6,19 | Inga fraktkostnader! |
| Paket med sparning, Economy, upp till 2 kg | €10,29 | €4,19 |
| Paket med sparning (Track & Trace) | €15,39 | €9,29 |
